site banner

I'm a "gun guy", AMA

A couple people had expressed interest in this topic, and I have a bit of extra time for a couple days, so here goes:

Bona fides: I am a former infantry NCO and sniper, hunter, competitive shooter, reloader, hobby gunsmith, sometimes firearms trainer and currently work in a gun shop, mostly on the paperwork/compliance side. Back in the day, was a qualified expert with every standard small arm in the US inventory circa 2003 (M2, 4, 9, 16, 19, 249, 240B, 21, 24, 82 etc.), and today hang around the 75th percentile of USPSA classifications. I've shot Cap-and-Ball, Trap and Sporting Clays badly; Bullseye and PRS somewhat better and IDPA/USPSA/UML/Two-gun with some local success. Been active in the 2A community since the mid-90s, got my first instructor cert in high school, and have held a CPL for almost twenty years now.

I certainly don't claim to be an expert in every aspect of firearms, there's huge areas that escape my knowledge base, but if you've got questions I'll do my best to answer.

Technical questions

Gun control proposals for feasibility

Industry

Training

Wacky opinions

General geekery

Some competition links (not my own) just for the interested.

https://youtube.com/watch?v=U5IhsWamaLY&t=173

https://youtube.com/watch?v=93nEEINflXE

https://youtube.com/watch?v=utcky0zq10E

https://youtube.com/watch?v=xVh4CjbgK7s

https://youtube.com/watch?v=0IK2RUxVq3A

21
Jump in the discussion.

No email address required.

1: Depends on how you are with maintenance. Some wear parts need to be replaced with some regularity, but as long as the frame, receiver and barrel are all still in working order, the gun can be made functional. Once those major parts wear out of spec either to reduce reliability or accuracy below acceptable standards, the gun is done. Obviously the type of gun and what those standards are will vary widely.

2: Most common wear parts are pretty cheap, it's worth it financially if you can install things yourself. If you have to pay a gunsmith, maybe not. On my competition guns, things like ejectors, extractors, strikers, hammers, sears etc. get replaced every twenty to fifty thousand rounds. Certain springs every 10k.

3: Nay so far, the idea has potential.

4: I have, more the technical stuff than the historical, IDGAF about old military guns. I like it, and found Ian very well informed and properly cautious about conclusions.

5: No idea, but France or Switzerland would be my guess if there is one.

6: I once cold-blued a muzzleloader barrel, never hot blued. I don't really care about scratches unless I'm selling a gun, and then I just take a sharpie to it. :P