Do you have a dumb question that you're kind of embarrassed to ask in the main thread? Is there something you're just not sure about?
This is your opportunity to ask questions. No question too simple or too silly.
Culture war topics are accepted, and proposals for a better intro post are appreciated.
Jump in the discussion.
No email address required.
Notes -
Got a DIY hack request regarding standard door locks like this: https://cdn.masterlock.com/product/orig/MLCOM_PRODUCT_WL0115.jpg
My parking garage has a number of exit stairways for those who don't want to wait for the elevator. The one most convenient to me recently had its door lever swapped from an always unlocked passage type (i.e. no keyway) to an always locked entry type (with keyway). The inside lever does not have a lock toggle button, so a key is required to open every time. It is quite bizarre--the door opens to an exit, and so has no reason to be secured from the inside, and I'd probably bet money that the fire marshal would have a problem with the new locked lever on an exit door. Additionally, none of the other exits are locked or have had their door levers replaced, so it cannot be some new security feature. Despite Chesterton's Fence and all, I can't help but think it's a strange mistake by a maintenance worker. The confusing part is I didn't recall the prior unlocked level as being broken in any way, so it's confusing why anyone would bother switching it in the first place.
Now, I'd like to continue using this exit. Rather than trying to find the relevant department and personnel to make a request, I'm hoping to just resolve this issue myself. I'm therefore looking for advice for the a) simplest and b) least sketchy solution.
Some ideas:
Apply super glue to the latch bolt so it never releases
Place gum in the strike plate so the latch bolt never latches
Buy a cheap always unlocked door lever and swap it out for the locked version
Is one of the above better than the rest, or is there a better 4) that I'm not thinking of?
I feel weird about 3) in case anyone asks me wtf I'm doing swapping out the door levers. I don't quite think it's an arrestable offense since I'm not trying to gain access to a secured building (on the contrary, I'm trying to exit from an unsecured building), but still it feels weird. 1) and 2) have a minor downside in that they look like sabotage, whereas 3) might appear to be a different maintenance worker just randomly deciding to switch out the handle.
OP here. Thanks for everyone's suggestions. I ended up going with 4) stuff paper into the latch bole hole of the strike plate. Pretty low tech and much less conspicuous than replacing the whole lever. We'll see if anyone removes the paper in the coming weeks/months!
P.S. I also thought of a possible 5), where you place a small adhesive rubber bumper pad on the door frame where a closed door would directly strike, thus just barely preventing the latch bolt from catching due to the extra distance. But I think 4) is still comparatively simpler and therefore more elegant.
More options
Context Copy link
More options
Context Copy link