WhiningCoil
Ghost of Quokka's Future
No bio...
User ID: 269
Has anything really changed in response to the Key bridge collapsing?
I suspect rebuilding that will go about as well as maintaining the power grid goes in South Africa. Import the third world, become the third world.
I also won't ever travel to Baltimore for any reason anymore. I used to go fairly frequently as a kid to see Orioles games with my family, my dad being a fan, and Cal Ripken being kind of a local hero. As a teenager and young adult in the late 90's and early 00's, we used to go often for Otakon. That was definitely when I began to notice weirdness.
One year the guy manning the desk at the hotel straight up stole some of the cash we used to pay for the room, and we didn't realize it until we went to check out and they said we still owed $100 that hadn't been paid up front. Being suburban teens, we were just confused, tired, in a hurry to leave, and dutifully paid again. We didn't realize we were stolen from until we had time on the drive home to talk about it.
Year after year the encounters we had with street people got weirder and worse. To this day, Baltimore had some of the scariest, most destitute hobos I've ever seen. One guy tried to lure us down an alleyway with the promise of prostitutes outside the convention center.
Many years later around 2019 we went to see Joe Rogan in Baltimore. The show was great, exiting the parking garage after was an experience. A car next to us, instead of waiting their turn, had the girlfriend just stand in the middle of the line of cars so he could back out. Cars kept going around her. Eventually he kirked out and just went for it, fuck the guy behind him he might back into. Then he spent the entire 30 minutes it took to slowly trickle out of the parking garage leaning out his windows, screaming at the guy in front of him who didn't let him in to get out and fight him. This being two cars behind us, my then pregnant wife was terrified he would eventually pull a gun and start shooting in our general direction, because Baltimore. And that was the last time. It's just not worth it.
The problem with Baltimore is the people in Baltimore. I don't think genocide followed by suicide is an option the local government can exercise. But maybe when WWIII happens we'll get lucky, although I doubt our adversaries would do us that favor.
One furthermore has to expect that even a Kamala Harris administration won't extradite a US citizen over hate speech.
I thought the same thing about how Jan 6 protestors would be treated given all the "fiery but mostly peaceful" protest all summer. Then they started sending grandmas who got waved through to pound me in the ass prison, and everyone went "Duh, obviously this was going to happen to regime enemies." Now I expect much the same. Everyone will act like there is no way Kamala would allow the UK to extradite Elon for hate speech, until she fucking does, and then they'll act like it was obvious and Elon was a moron for going against the regime.
Good luck on the 10k. Once upon a time I ran, but these 40 year old knees don't do it anymore.
Unicorn Overlord was a very pleasant surprise. I immediately craved more games like that, and found that there aren't any. A shame.
Dude, it's legit confusing reading someone talking about doing their wife's master's final project for them. Like, I didn't even know schools allowed that. Do they allow that? It's like reading about someone just casually mentioning they took $100,000 out of their company's bank account, so brazenly and matter of factly you wonder if they are actually allowed to do that somehow? Like, you're pretty sure that's just embezzling, but they sure don't act like they are emblezzling.
So it goes with this casual matter of fact admission of academic fraud.
I suspect that there is a missing demographic on the Motte: married with children. They are too busy to comment here. But I'm guessing that they want the junkies gone. They want the junkies gone before their children grow up and reach the age to be at risk. They don't want that to coincide with a high point of the heroin cycle. The stakes are much higher than a friend having plumbing gear stolen out of his truck.
Reporting in, and I post less largely because now that I have more skin in the game, When I imagine these issues impacting my daughter, I quickly become incandescent with rage. The least of my problems is getting modded here for being "uncharitable" to the monsters in human skin roaming amongst us. Far more worried about ending up on a watch list given that violence in my first, second and last reaction to the question of "What will I do when this arrives at my door?"
We had to put an 8' tall fence around our garden, mostly for deer. One day we did notice a bunny snuck under the door, so I had to close that gap. That seems to have worked.
The insects, drought, and hail storms on the other hand... My poor wife is totally demotivated after the carnage this summer wrought on all her hard work.
My next project is a set of 4 chairs for my gaming table. So far I've scaled down these plans because I find them excessively wide and deep for my taste. They're 2 inches wider and deeper than any other chair in my house, and those are all perfectly comfortable. I also don't trust pocket hole screws to hold a hardwood chair together, so instead I'll be doing mortise and tenon joinery for everything. The angled joint near the bottom of the chair is going to be a new challenge for me, but I'm looking forward to it. I suspect I'll cut it straight using a router, and then come in later with a chisel to take out the rest of that shallow angle. Especially since I plan on doing the tenons using a coping sled on a router table as that will be fastest and easiest, and I've got a ton of tenons to cut for four chairs.
Anyways, first step is going through all my offcuts from the table and figuring out what can be used for what. I still have 3 whole planks of rustic walnut left over as well. I may end up only needing some 6/4 stock from the lumber yard for the legs.
I'm constantly tempted to get more home gym stuff, now that I have a home. I thought it would be dirt cheap second hand, but even heavily used, people expect $100's for a simple bench, bar and plates.
I do have a sizeable collection of kettlebells I use at home though, which has been nice because they store easily.
That's cool.
For whatever reason I'm struggling to parse your second paragraph. Were you getting your masters too? Was this a group project?
Thanks. There is something deeply sentimental about making the furniture that goes into your home, that you and your family enjoy and make memories around. The making memories is what I'm looking forward to the most. Every night my daughter wants to play games at it now. But she's only 4, so we've mostly stuck to Carcassonne, Kingdomino and Ingenious because she can handle the matching tile placement, and we do the score for her. I'd post her adorable pictures, but we're trying to keep her internet profile nonexistent. Last thing we need is her in a bunch of digital fingerprint databases from birth.
I know when I did mine and polished to a glass finish, my steel wool pad was already pretty gummed up and dull from the wax. I have raw dogged with steel wool and gone through the shellac in a flash. I was actually just reviewing a Paul Sellers video where he's doing a shellac finish with wax, and he just barely touches it with a dry 0000 steel wool pad, and then comes after with the wax. Never hurts to keep trying different techniques though.
I like the look and feel of shellac over oil. I also don't like how long it takes an oil to stop off gassing.
Thanks.
One thing I keep wondering about is how much I should really put some elbow grease into it when I'm doing the final rub with 0000 steel wool and furniture wax. I did notice the more aggressive I got, the more I got it to a glasslike smoothness. But it would be straight up warm from the friction when I was done, and I was worried about how much finish I might actually be rubbing off with all the effort, so I ultimately erred on the side of being more conservative. Maybe I'll experiment a bit more with my approach as I work on the chairs since I just care about them less.
You know, in person it doesn't match as much as it appears to in that photo. Also, not real hardwood, just LVP.
I wouldn't both "stealing" my design, it sucked and didn't work that well :P You can see I shoved a feeler gauge in there to try to micro adjust the angle. Might have worked better with an actual hand plane though.
You know, Breath of the Wild IMHO had vibes going for it a lot. A lot of those vibes were downwind of game design decisions, some were nostalgia though. Going from your typical Ubisoft open world slop, with a map full of ADHD/OCD inducing icons yanking you left and right, to Breath of the Wilds more sedate experience of scaling tall mountains and then manually placing markers for places you want to explore, the difference in vibes is enormous. Ubislop makes me downright anxious, Breath of the Wild felt remarkably chill and relaxing. I think people responded to that strongly.
Then again, if you enjoy Ubislop, Breath of the Wild feels empty and boring.
Another aspect of Breath of the Wild that was deeply rewarding was that the world wasn't as empty as it seems at first. Sure there are the Shrines, then there are also some great riddles to solve, puzzles in the landscape, and literally hundreds of Korok puzzles hiding in plain sight. Now I'm not encouraging anyone to try to do all of them. That would be insane. But it's deeply rewarding to be wondering through an "empty" area, and suddenly something catches your eye. Some tree that seems to have a little too much intent. Turns out it actually is a puzzle and you get a little reward. It's nice.
Some of the best quest have very little advertising. I forget how I discovered the Terrytown questline, but it was fantastic, and largely did not involve following quest markers for 2 hours straight.
All that said, I played Breath of the Wild before I had a family. When I could spend upwards of 4 hours a play session enjoying the vibes and being immersed in the world. When I attempted to play Tears of the Kingdom however many years later, it went significantly less well. First I could only play in short burst, which I wanted to be far more goal oriented than is optimal to enjoy the game. I forget how far I got, and I doubt I'll ever return to finish it. All the complaints you have were made far more manifest.
This has been a goal of mine forever. Ever since I started board gaming probably 15 years ago, and I saw Geek Chic's tables, I wanted one. Of course, I was moving from one bedroom apartment to one bedroom apartment at the time, and they were bonkers expensive, and then Geek Chic went bankrupt. So that never happened. But it's always been on my bucket list.
Well, it's finally happened! I've settled down, I own a home, I have my nerd cave, and it's time for the table. But having a family and responsibilities, it's hard to justify dropping between $3000 to $6000 on a table for gaming. So instead I spent $450 on some 4 quarters and 5 quarters rustic walnut, $50 on a sheet of plywood, $50 on some cork, and probably another $100 on assorted glues, finishes, hardware and fabric. And lets not forget about 3 months of my precious free time, as well as perhaps some not so free time. My wife is starting to want me to be done with this so she can have her husband back for things she wants done. Like another chicken coop, or redoing more of the kitchen.
It starts with the plan, rather dog eared and torn at this point, but you'll have to forgive me. The idea is that I can bring it into my basement in pieces: legs, armrest/apron, bottom play surface, supports, and toppers, then assemble it. Because getting a whole ass hardwood table into my basement simply isn't going to happen, much less back out if I ever move. Now normally this would be done with some simple leg/apron hardware like this, but my problem with most hardware I saw was it would interfere or look really ugly with the recessed playing area. So instead I made things difficult for myself and went with a dovetail slot design, along with an inner and outer table apron. To add another plane of rigidity, I also decided to use some dowels for the arm rest to both keep them level with one another since they are separate parts, but I also kept them perpendicular to the direction of the wood despite being along a 45 degree miter joint. This also has the added benefit of making assembly somewhat easier. I tested all this joinery out on some scraps of maple I had lying around, and then went to work on my walnut.
First I made the legs. These are about 3 inches thick, and instead of gluing up a solid 3x3 chunk of walnut, I decided to go with miter locks. They glue up super strong, and conform into place effortlessly, plus you get an attractive face grain on every side. I did have to go over the corners with a burnishing rod to close up some gaps however. Still, they came out super nice.
After that I picked out the boards for the aprons, and then marked the boards for the arm rests and toppers. I'm still learning how to pick out lumber, so there were a lot of really gnarly knots I had to work around in figuring out my rough cuts. Some couldn't be avoided, but the ugliest defects became interior surfaces. It's a fun process, like reverse tetris. The aprons milled up nicely, then I shellaced the legs. I made a jig to assist in routing out the dovetails and it worked amazingly well once I had it dialed in. After a test fit, and laying the arm rest on loosely, I was very proud of myself. Each individual dovetail slot had a little play in it, but collectively there was none, and the table doesn't wobble a millimeter when nudged or even hit. But now began the laborious process of getting the finish done.
First I filled the voids with some sawdust and wood glue. The results were OK but I think next time I might try sawdust and CA glue. I also had to route the rabbet the toppers will sit inside along the armrest. I wasn't 100% confident in my ability to have perfectly flat toppers, so I decided to use felt along the rabbet to compensate for a small about of unevenness. The last thing I wanted was any rattle in the toppers as people use the table. It worked fantastic. Then I shellacked and waxed the apron, along with the underside of the arm rest. Visible surfaces got 3 coats of shellac and hard wax, interior surfaces got a single seal coat of shellac. I've seen conflicting reports about how smart this is. Some people swear you must evenly coat every surface or the humidity will unevenly effect the wood, resulting in cupping or cracking. But every piece of furniture I've ever seen, even really nice hardwood furniture, skimps on the interior or underside. So I'm going to assume it'll be OK.
One thing I've learned is I definitely prefer finishing surfaces before assembly versus attempting to finish inside corners. I'm terrible at inside corners, and always leave really obnoxious marks where the coats on one surface run into the other. Adds more steps to the process, but the results are way better with my skill level.
Along the way I glued up all the panels for the toppers. Each panel is approximately a foot wide and and three feet long, with some rabbets along the sides to slot into the table armrest or each other. I also had to make a Home Depot trip for plywood, which I have a helpful carrier for. Full sheets of plywood are so much cheaper than project panels. I also didn't want the bottom play surface to have any seams. And this was super easy to break down to the proper dimensions thanks to a rip cut guide I got. Because I still can't freehand very straight with a circular saw, and track saws are more expensive than they have any right to be. Needed some notches taken out for the leg corners which intrude about a 1/2 inch into the play area, but I did that with a small hand saw.
The aprons got joined to the arm rest using a fuck ton of pocket hole screws. I also did some mortise and tenon joinery for the support planks that will hold up the playing surface. They are a little loose, but I judged that to be acceptable since I won't be gluing them and they are going to be held in on both sides by the rest of the table joinery.
Another test fit, checking the plywood, and onto attaching the cork. This was just accomplished with a 3M adhesive spray, and cutting the excess off with a utility knife. Super easy.
I attempted to use a ghetto shooting board and my carbide sanding block to clean up the angles on the armrest miters. It made them better but only slightly. I think I just need to invest in an actual hand plane and a proper shooting board.
Next it came time to do the pocket hole screws, and after getting everything situated and clamped it came together quickly and easily. I shellacked the rabbet on the topper pieces and then applied the felt. The result was a very nice and very flat top surface. After much sanding to get out a few of the uneven areas, it was time to take it all apart and get it ready to be finished.
There were some finishing details I needed to attend to. I made these support pieces to help hold up the play surface and spread them around the edge of the inner apron. I also had my wife help me attach the upholstery velvet to the plywood and cork with more 3M adhesive spray, then pulled it back and stapled it to the bottom. I think it came out great in the end.
Much sanding, shellacing and waxing later, it was ready for reassembly. It went back together way harder than it came apart. I allowed some room between the plywood and the apron for the velvet to rap around, but not quite enough. It was a tight fit that took some moderate man handling to line back up. Upside, the bottom is in there nice and snug and won't move around on you. And here we are with the final product, covered and uncovered. It feels really good having made something beautiful to put in my home, and I'm looking forward to my daughter making lots of memories of family game nights around it.
Side note, should I ever do this again, I think I'll use loose tenon joinery instead of dowels. The dowels just had too much wiggle in them to really keep those sections level to my satisfaction. Also, as good as the finish came out, I think I need to start thinning my shellac and doing more, thinner coats. It was probably my best, most even application to date, but in the wrong lighting at the wrong angle if you look closely you can still see some unevenness. Alas. Lastly, one of the boards that makes up half a topper has a network of cracks radiating through it parallel to the face gain. I first noticed it in the milling process, but it didn't look that bad, I thought cutting off the last inch or two would get rid of it. Also, I had no spares to replace it with. I kept going, and every step of the way in, it spread even more. I kept attempting to stabilize it by filling it in with glue, but that didn't seem to work as I could only address the exposed portion of the crack which was retreating deeper and deeper into the wood unseen. It resulted in one of the toppers having a distinct hollow feeling in a few spots. If it gets even worse than it already is, I guess I'll just make a replacement. Because I have that option. In the future, cracked boards get thrown out, no matter how far along the process I am.
I was once asked if my adventurers in woodworking and the money I've spent has been "worth it". It was hard to quantify when I was making little experimental practice projects, or unique one off's like an oak computer case or a bookshelf for old PC game manuals. When I made the cabinets for the kitchen I probably saved about $300. This table however, I probably saved myself enough money building it myself versus buying one that it pays for all of my tools and then some. If I had the means to make more tables and reliably sell them, I'd be almost tempted to.
Next up, a set of 4 chairs, mostly with the off cuts from the table. Gotta stretch that $450 I spent on lumber as far as it'll go.
Because the way things are might not be the way things stay. Sure, all being on that list now means is that an air marshal tails her as she flies. In the future that might escalate. Maybe it will be supplied as evidence to a FISA court to spy on all her private correspondence, which they then use to dig for further process crimes, for her, or people around her.
Maybe they assign a politically motivated air marshal to her that claims to see some shit that may in fact have never happened.
Here I come with my big fat black pill again. Choke it down. I'm just hoping I'm as wrong about this as I was about Biden staying in the race.
Before Kamala was crowned in corrupt undemocratic backroom deals, I was feeling good. I fully bought into the zeitgeist that the MSM was powerless, and rapidly losing control of The Narrative. Alas, looking back that appears to have been a coordinated effort to starve Biden out of the race, because as soon as he was gone, they turned it right back on again. All I see, even in otherwise critical independent media, is that Kamala's popularity is through the fucking roof. Panoramic photos of some rally she gave lately that easily gives a Trump rally a run for it's money. It's inexplicable to me. Everything we knew about this woman in the 2020 Primary, in her appearances as VP, say this should be impossible. And yet here we are. They've managed to invert reality once again. Apparently she's even trending on TikTok for reasons I'm sure are not suspicious at all. Leftist are euphoric, conservatives are manufacturing cope. I bet I'm gonna get an earful the next time my in laws are over about how amazing Kamala is, for no reason they can articulate at all.
Bold move. I thought PA's electoral votes made Shapiro a lock in, but apparently experience walking the tightrope of letting race riots run rampant, and yet not having them stick to you electorally was more important. I know what I'm expecting the next few months until election day.
The problem is it's the very same people (broadly) who spent the last 10 years obfuscating and playing loose and fast with the trans/intersex distinction that are now rolling in and yelling at people for not understanding the trans/intersex distinction. There was little to no difference between the two when it suited them, now there is all the difference in the world when it suits them. And there are no "facts" about how we morally or intellectually should distinguish between the two, only social convention. Which the narrative controllers have decided is now turning on a dime so that they can continue their monopoly on deciding right and wrong, unburdened by their previous statements or arguments.

I often wonder if we're seeing some sort of terrible example the Founder Effect. Because African American slave descendants aren't just a random sampling of Africans that got plucked up by UFOs and dropped here. They were the losers of inter tribal civilizational fitness tests, captured and sold off. That has to have some sort of selection bias on what subset of Africans ended up in the slave trade in the first place.
More options
Context Copy link