This thread is for anyone working on personal projects to share their progress, and hold themselves somewhat accountable to a group of peers.
Post your project, your progress from last week, and what you hope to accomplish this week.
If you want to be pinged with a reminder asking about your project, let me know, and I'll harass you each week until you cancel the service
Jump in the discussion.
No email address required.
Notes -
So, as mentioned in previous weeks, I've been trying to TRONify my cargo bike and kids' bike helmets the last few weeks and I've never quite appreciated how much of small electronics work is shopping in general and specifically, shopping for plastic pieces of shit. This isn't what I thought I would struggle with. I'm a fairly skilled dev so I thought I would struggle with EE concepts or the dexterity required for soldering or even simply being able to work with a magnifying glass but no, shopping, which I find borderline triggering due to hatred of clutter, is the actual limiting factor for me.
And shopping for an enclosure for housing all of this junk is the challenge. For the bikes themselves I can use standard Hammond plastic enclosures and consumer battery packs, but for bike helmets all of the standard stuff adds way, way too much bulk.
The rough sketch of components I need housed are
Finding an enclosure that isn't as bulky as shit for this seems impossible, so I'll probably have to 3d print something. Which means I need a 3d printer[2]. From my time being involved with a local Makerspace, my opinion of 3d printers is that they spend most of their time being broken, but I've heard from trusted advisors that that's because my experience has been with 3d printers made by the decadent and pathetic Western concerns and that the Bambu 3d printers from China have changed everything[3]
So... maybe that's my next purchase. Perhaps I can justify the 3d printer as some kind of educational value for the kids.
Does my experience here sound right so far? Small electronics success often hinges on shopping skill?
Notes
I do see combination boost converter/USB chargers for 18650 cells, and that would cut down on complexity/bulk/work, but their amperage is much too low to run LED strips off of so I'm stuck buying individual components for this.
Though I think if I want a really cool looking transparent enclosure so we can see circuit boards and blinken lights I'll need acrylic covers? Which requires getting a laser cutter too? I wonder what educational value for kids these have...
So long as you have no opsec concerns from running proprietary firmware that requires a cloud connection to do anything from a nation state that we might go to war with in the near future. Though I'd be kind of amused to see the worst that can happen.
Switching gears (ha), but to avoid making another post, I'll consolidate into this one.
Aliexpress.com has incredible deals but takes forever, so that stalls my TRON helmet project out.
So, in the meantime, I've gotten to
triangledodge chargerskydome in my 3d game (pic attached) that was inspired by binge watching the Fast and the Furious series while feverish. I made some generic cyberspace background while waiting for the right time to take a 360 panorama pic of a skyline in my town.I fixed the texture banding issue. The camera now follows the car. The car can steer and accelerate. It runs okay on my hardware. So... I guess the next priority is to make a race track and add some collision detection to this bitch? A computer controlled car to drive against? Maybe incorporate some engine revving sounds?
I suppose a true Ride or Die Homies game needs something more inspired than a race track though. Like outrunning a nuclear explosion. Or battling a mechanized raptor.
I should be doing this smart and using Unreal Engine or something, instead of writing a 3d engine from scratch, but I got into computers in the first place because I wanted to write a 3d engine (before getting distracted by the world of Linux and networking), so coming back to this feels like addressing some unresolved spiritual concerns.
You know, once upon a time I wanted to do more electronics stuff. But this is more or less the brick wall I ran up again. Sourcing parts is bonkers complicated, and simply was not a part of the hobby I was going to enjoy. I repaired a few old motherboards, and developed enough soldering skill to repair the odd toaster, mouse or audio speaker, and more or less decided to leave it there. Although I'm always have my eye out for an inspiring woodworking/electronics project.
It's really the most hellish part. I'm trying to just take it easy and not worry about how soon I get this done to avoid stressing.
Starter kits help a bit, but they're only like $10 whereas I want something like $100-200 that contains the top 1000 things people use for, e.g. Arduino or LEDs.
I fantasize about taking a two week vacation to Shenzhen and hiring some Chinese EEs that speak English to show me around and going home with a suitcase full of stuff I bought off the street.
You know, that really strikes at the duality of it for me. I don't want to be fucking around with arduino components like electronic legos, but then the ecosystem of all electronic components is so vast and wide and deep that you really are just adrift.
My dream for a time was to build my own 8-bit computer with some cheap 6502, VGA output and synthesizer audio as a fun learning exercise. But it turns out nobody makes VGA chips anymore? Or audio? Basically everything is SOC, and every project you see along these lines has a legit 8-bit Z80 or 6502, and then uses an SOC as a co-processor for it's VGA and sound, or has you using 20-30 year old salvaged chips.
Oh, yeah. Seems like people want small low-power computers to drive widgets rather than make an IBM PC from 1986 on a cocktail napkin.
Ideally all of this should could be end-to-end done with CAD software, or by writing out a .spec file and uploading it to a magic box or web site and then a microwave dings and it's ready. Or it arrives in the mail. Maybe one day...
Maybe it's possible to 3d print ghetto PCBs and also 3d print conductive filament and snap it into place?
More options
Context Copy link
More options
Context Copy link
More options
Context Copy link
More options
Context Copy link
More options
Context Copy link